/*-------------------------------------------------------------------------
 *
 * read.c
 *	  routines to convert a string (legal ascii representation of node) back
 *	  to nodes
 *
 * Portions Copyright (c) 1996-2025, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/nodes/read.c
 *
 * HISTORY
 *	  AUTHOR			DATE			MAJOR EVENT
 *	  Andrew Yu			Nov 2, 1994		file creation
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <ctype.h>

#include "common/string.h"
#include "nodes/bitmapset.h"
#include "nodes/pg_list.h"
#include "nodes/readfuncs.h"
#include "nodes/value.h"


/* Static state for pg_strtok */
static const char *pg_strtok_ptr = NULL;

/* State flag that determines how readfuncs.c should treat location fields */
#ifdef DEBUG_NODE_TESTS_ENABLED
bool		restore_location_fields = false;
#endif


/*
 * stringToNode -
 *	  builds a Node tree from its string representation (assumed valid)
 *
 * restore_loc_fields instructs readfuncs.c whether to restore location
 * fields rather than set them to -1.  This is currently only supported
 * in builds with DEBUG_NODE_TESTS_ENABLED defined.
 */
static void *
stringToNodeInternal(const char *str, bool restore_loc_fields)
{
	void	   *retval;
	const char *save_strtok;
#ifdef DEBUG_NODE_TESTS_ENABLED
	bool		save_restore_location_fields;
#endif

	/*
	 * We save and restore the pre-existing state of pg_strtok. This makes the
	 * world safe for re-entrant invocation of stringToNode, without incurring
	 * a lot of notational overhead by having to pass the next-character
	 * pointer around through all the readfuncs.c code.
	 */
	save_strtok = pg_strtok_ptr;

	pg_strtok_ptr = str;		/* point pg_strtok at the string to read */

	/*
	 * If enabled, likewise save/restore the location field handling flag.
	 */
#ifdef DEBUG_NODE_TESTS_ENABLED
	save_restore_location_fields = restore_location_fields;
	restore_location_fields = restore_loc_fields;
#endif

	retval = nodeRead(NULL, 0); /* do the reading */

	pg_strtok_ptr = save_strtok;

#ifdef DEBUG_NODE_TESTS_ENABLED
	restore_location_fields = save_restore_location_fields;
#endif

	return retval;
}

/*
 * Externally visible entry points
 */
void *
stringToNode(const char *str)
{
	return stringToNodeInternal(str, false);
}

#ifdef DEBUG_NODE_TESTS_ENABLED

void *
stringToNodeWithLocations(const char *str)
{
	return stringToNodeInternal(str, true);
}

#endif


/*****************************************************************************
 *
 * the lisp token parser
 *
 *****************************************************************************/

/*
 * pg_strtok --- retrieve next "token" from a string.
 *
 * Works kinda like strtok, except it never modifies the source string.
 * (Instead of storing nulls into the string, the length of the token
 * is returned to the caller.)
 * Also, the rules about what is a token are hard-wired rather than being
 * configured by passing a set of terminating characters.
 *
 * The string is assumed to have been initialized already by stringToNode.
 *
 * The rules for tokens are:
 *	* Whitespace (space, tab, newline) always separates tokens.
 *	* The characters '(', ')', '{', '}' form individual tokens even
 *	  without any whitespace around them.
 *	* Otherwise, a token is all the characters up to the next whitespace
 *	  or occurrence of one of the four special characters.
 *	* A backslash '\' can be used to quote whitespace or one of the four
 *	  special characters, so that it is treated as a plain token character.
 *	  Backslashes themselves must also be backslashed for consistency.
 *	  Any other character can be, but need not be, backslashed as well.
 *	* If the resulting token is '<>' (with no backslash), it is returned
 *	  as a non-NULL pointer to the token but with length == 0.  Note that
 *	  there is no other way to get a zero-length token.
 *
 * Returns a pointer to the start of the next token, and the length of the
 * token (including any embedded backslashes!) in *length.  If there are
 * no more tokens, NULL and 0 are returned.
 *
 * NOTE: this routine doesn't remove backslashes; the caller must do so
 * if necessary (see "debackslash").
 *
 * NOTE: prior to release 7.0, this routine also had a special case to treat
 * a token starting with '"' as extending to the next '"'.  This code was
 * broken, however, since it would fail to cope with a string containing an
 * embedded '"'.  I have therefore removed this special case, and instead
 * introduced rules for using backslashes to quote characters.  Higher-level
 * code should add backslashes to a string constant to ensure it is treated
 * as a single token.
 */
const char *
pg_strtok(int *length)
{
	const char *local_str;		/* working pointer to string */
	const char *ret_str;		/* start of token to return */

	local_str = pg_strtok_ptr;

	while (*local_str == ' ' || *local_str == '\n' || *local_str == '\t')
		local_str++;

	if (*local_str == '\0')
	{
		*length = 0;
		pg_strtok_ptr = local_str;
		return NULL;			/* no more tokens */
	}

	/*
	 * Now pointing at start of next token.
	 */
	ret_str = local_str;

	if (*local_str == '(' || *local_str == ')' ||
		*local_str == '{' || *local_str == '}')
	{
		/* special 1-character token */
		local_str++;
	}
	else
	{
		/* Normal token, possibly containing backslashes */
		while (*local_str != '\0' &&
			   *local_str != ' ' && *local_str != '\n' &&
			   *local_str != '\t' &&
			   *local_str != '(' && *local_str != ')' &&
			   *local_str != '{' && *local_str != '}')
		{
			if (*local_str == '\\' && local_str[1] != '\0')
				local_str += 2;
			else
				local_str++;
		}
	}

	*length = local_str - ret_str;

	/* Recognize special case for "empty" token */
	if (*length == 2 && ret_str[0] == '<' && ret_str[1] == '>')
		*length = 0;

	pg_strtok_ptr = local_str;

	return ret_str;
}

/*
 * debackslash -
 *	  create a palloc'd string holding the given token.
 *	  any protective backslashes in the token are removed.
 */
char *
debackslash(const char *token, int length)
{
	char	   *result = palloc(length + 1);
	char	   *ptr = result;

	while (length > 0)
	{
		if (*token == '\\' && length > 1)
			token++, length--;
		*ptr++ = *token++;
		length--;
	}
	*ptr = '\0';
	return result;
}

#define RIGHT_PAREN (1000000 + 1)
#define LEFT_PAREN	(1000000 + 2)
#define LEFT_BRACE	(1000000 + 3)
#define OTHER_TOKEN (1000000 + 4)

/*
 * nodeTokenType -
 *	  returns the type of the node token contained in token.
 *	  It returns one of the following valid NodeTags:
 *		T_Integer, T_Float, T_Boolean, T_String, T_BitString
 *	  and some of its own:
 *		RIGHT_PAREN, LEFT_PAREN, LEFT_BRACE, OTHER_TOKEN
 *
 *	  Assumption: the ascii representation is legal
 */
static NodeTag
nodeTokenType(const char *token, int length)
{
	NodeTag		retval;
	const char *numptr;
	int			numlen;

	/*
	 * Check if the token is a number
	 */
	numptr = token;
	numlen = length;
	if (*numptr == '+' || *numptr == '-')
		numptr++, numlen--;
	if ((numlen > 0 && isdigit((unsigned char) *numptr)) ||
		(numlen > 1 && *numptr == '.' && isdigit((unsigned char) numptr[1])))
	{
		/*
		 * Yes.  Figure out whether it is integral or float; this requires
		 * both a syntax check and a range check. strtoint() can do both for
		 * us. We know the token will end at a character that strtoint will
		 * stop at, so we do not need to modify the string.
		 */
		char	   *endptr;

		errno = 0;
		(void) strtoint(numptr, &endptr, 10);
		if (endptr != token + length || errno == ERANGE)
			return T_Float;
		return T_Integer;
	}

	/*
	 * these three cases do not need length checks, since pg_strtok() will
	 * always treat them as single-byte tokens
	 */
	else if (*token == '(')
		retval = LEFT_PAREN;
	else if (*token == ')')
		retval = RIGHT_PAREN;
	else if (*token == '{')
		retval = LEFT_BRACE;
	else if ((length == 4 && strncmp(token, "true", 4) == 0) ||
			 (length == 5 && strncmp(token, "false", 5) == 0))
		retval = T_Boolean;
	else if (*token == '"' && length > 1 && token[length - 1] == '"')
		retval = T_String;
	else if (*token == 'b' || *token == 'x')
		retval = T_BitString;
	else
		retval = OTHER_TOKEN;
	return retval;
}

/*
 * nodeRead -
 *	  Slightly higher-level reader.
 *
 * This routine applies some semantic knowledge on top of the purely
 * lexical tokenizer pg_strtok().   It can read
 *	* Value token nodes (integers, floats, booleans, or strings);
 *	* General nodes (via parseNodeString() from readfuncs.c);
 *	* Lists of the above;
 *	* Lists of integers, OIDs, or TransactionIds.
 * The return value is declared void *, not Node *, to avoid having to
 * cast it explicitly in callers that assign to fields of different types.
 *
 * External callers should always pass NULL/0 for the arguments.  Internally
 * a non-NULL token may be passed when the upper recursion level has already
 * scanned the first token of a node's representation.
 *
 * We assume pg_strtok is already initialized with a string to read (hence
 * this should only be invoked from within a stringToNode operation).
 */
void *
nodeRead(const char *token, int tok_len)
{
	Node	   *result;
	NodeTag		type;

	if (token == NULL)			/* need to read a token? */
	{
		token = pg_strtok(&tok_len);

		if (token == NULL)		/* end of input */
			return NULL;
	}

	type = nodeTokenType(token, tok_len);

	switch ((int) type)
	{
		case LEFT_BRACE:
			result = parseNodeString();
			token = pg_strtok(&tok_len);
			if (token == NULL || token[0] != '}')
				elog(ERROR, "did not find '}' at end of input node");
			break;
		case LEFT_PAREN:
			{
				List	   *l = NIL;

				/*----------
				 * Could be an integer list:	(i int int ...)
				 * or an OID list:				(o int int ...)
				 * or an XID list:				(x int int ...)
				 * or a bitmapset:				(b int int ...)
				 * or a list of nodes/values:	(node node ...)
				 *----------
				 */
				token = pg_strtok(&tok_len);
				if (token == NULL)
					elog(ERROR, "unterminated List structure");
				if (tok_len == 1 && token[0] == 'i')
				{
					/* List of integers */
					for (;;)
					{
						int			val;
						char	   *endptr;

						token = pg_strtok(&tok_len);
						if (token == NULL)
							elog(ERROR, "unterminated List structure");
						if (token[0] == ')')
							break;
						val = (int) strtol(token, &endptr, 10);
						if (endptr != token + tok_len)
							elog(ERROR, "unrecognized integer: \"%.*s\"",
								 tok_len, token);
						l = lappend_int(l, val);
					}
					result = (Node *) l;
				}
				else if (tok_len == 1 && token[0] == 'o')
				{
					/* List of OIDs */
					for (;;)
					{
						Oid			val;
						char	   *endptr;

						token = pg_strtok(&tok_len);
						if (token == NULL)
							elog(ERROR, "unterminated List structure");
						if (token[0] == ')')
							break;
						val = (Oid) strtoul(token, &endptr, 10);
						if (endptr != token + tok_len)
							elog(ERROR, "unrecognized OID: \"%.*s\"",
								 tok_len, token);
						l = lappend_oid(l, val);
					}
					result = (Node *) l;
				}
				else if (tok_len == 1 && token[0] == 'x')
				{
					/* List of TransactionIds */
					for (;;)
					{
						TransactionId val;
						char	   *endptr;

						token = pg_strtok(&tok_len);
						if (token == NULL)
							elog(ERROR, "unterminated List structure");
						if (token[0] == ')')
							break;
						val = (TransactionId) strtoul(token, &endptr, 10);
						if (endptr != token + tok_len)
							elog(ERROR, "unrecognized Xid: \"%.*s\"",
								 tok_len, token);
						l = lappend_xid(l, val);
					}
					result = (Node *) l;
				}
				else if (tok_len == 1 && token[0] == 'b')
				{
					/* Bitmapset -- see also _readBitmapset() */
					Bitmapset  *bms = NULL;

					for (;;)
					{
						int			val;
						char	   *endptr;

						token = pg_strtok(&tok_len);
						if (token == NULL)
							elog(ERROR, "unterminated Bitmapset structure");
						if (tok_len == 1 && token[0] == ')')
							break;
						val = (int) strtol(token, &endptr, 10);
						if (endptr != token + tok_len)
							elog(ERROR, "unrecognized integer: \"%.*s\"",
								 tok_len, token);
						bms = bms_add_member(bms, val);
					}
					result = (Node *) bms;
				}
				else
				{
					/* List of other node types */
					for (;;)
					{
						/* We have already scanned next token... */
						if (token[0] == ')')
							break;
						l = lappend(l, nodeRead(token, tok_len));
						token = pg_strtok(&tok_len);
						if (token == NULL)
							elog(ERROR, "unterminated List structure");
					}
					result = (Node *) l;
				}
				break;
			}
		case RIGHT_PAREN:
			elog(ERROR, "unexpected right parenthesis");
			result = NULL;		/* keep compiler happy */
			break;
		case OTHER_TOKEN:
			if (tok_len == 0)
			{
				/* must be "<>" --- represents a null pointer */
				result = NULL;
			}
			else
			{
				elog(ERROR, "unrecognized token: \"%.*s\"", tok_len, token);
				result = NULL;	/* keep compiler happy */
			}
			break;
		case T_Integer:

			/*
			 * we know that the token terminates on a char atoi will stop at
			 */
			result = (Node *) makeInteger(atoi(token));
			break;
		case T_Float:
			{
				char	   *fval = (char *) palloc(tok_len + 1);

				memcpy(fval, token, tok_len);
				fval[tok_len] = '\0';
				result = (Node *) makeFloat(fval);
			}
			break;
		case T_Boolean:
			result = (Node *) makeBoolean(token[0] == 't');
			break;
		case T_String:
			/* need to remove leading and trailing quotes, and backslashes */
			result = (Node *) makeString(debackslash(token + 1, tok_len - 2));
			break;
		case T_BitString:
			/* need to remove backslashes, but there are no quotes */
			result = (Node *) makeBitString(debackslash(token, tok_len));
			break;
		default:
			elog(ERROR, "unrecognized node type: %d", (int) type);
			result = NULL;		/* keep compiler happy */
			break;
	}

	return result;
}